手指式血氧飽和監測器/Touch Screen Handheld Type Pulse Oximeter

  手指式血氧飽和監測器
Touch Screen Handhold Type Pulse Oximeter
                    衛署醫器製字第002388號
                                                         北市衛器廣字第105010109號
Technical Specification
顯示格式 LED顯示
血氧飽和度測量範圍 35%~100%
脈搏率測量範圍 30~240bpm
脈搏波強度顯示 棒圖顯示
電池電量顯示 LED符號
電源要求 2個四號1.5V鹼性電池
電壓工作範圍 2.2~3.6伏
功耗 不大於60毫安培
解析度 血氧飽和度±1%,脈率 ± 1bpm
**測量精度 血氧飽和度在70%~100%段為±2% *小於70無定義

功能開關,用於打開儀器,在無手指插入時5秒內自動關機。


Instructions
  1. 1. Install alkaline battery (Lead-acid battery may leak corrosive fluid which may damage the Oximeter)
  2.  
    • -Insert two No. 4 (3A, 1.5V) taking note of polar ends as displayed
    •  
    • -Slide in the battery cover case
 
  1. 2. To test blood oxygen concentration:
  2.  
    • -Press the “ON” button to start the Oximeter
    •  
    • -Open the finger probe by squeezing the hinge end, insert your index finger (with your nail facing up) into the finger probe and release the hinge. Make sure your index finger touches the end of the probe
    •  
    • -To turn off the machine, release your finger from the finger probe and press the “power” button. The machine will switch off in about 3 seconds
  3.  
  4. 3. Touch Screen Portable Pulse
  5.  
    • -Oximeter explanation
    •  
      1. i. Power button (changes display screen)
      2.  
      3. ii. Oxygen concentration indicator
      4.  
      5. iii. Pulse indicator
      6.  
      7. iv. Heart rate indicator
    • -Display format
    •  
      1. i. Oxygen-blood concentration (SPO2): 35-99%
      2.  
      3. ii. Pulse (BPM:Pulse) 30 – 240min/Pulse
      4.  
      5. iii. Pulse wave display: horizontal 6 wave format
      6.  
      7. iv. Low power indicator: “Low Battery” message will appear on screen
 
  1. 4. Caution:
  2.  
    • -Please remove nail polish or any other cosmetics from your nail before using the oximeter
    •  
    • -It not recommended for the test subject to have long nails as this may interfere with the accuracy of oximeter
    •  
    • -It is recommended that index, middle or ring finger be used to be tested. Fingers that are too cold, thick, or thin may hamper the accuracy of the result
    •  
    • -Please ensure that during testing, the finger does not wiggle or move, and that the test subject remains stationary to ensure accurate result